How to program transponder
|
Working with TMPro2 is easy.
You have to remove immobox from car and to read eeprom from memory device. After that start software, press OPEN FILE and load eeprom dump into software. You can also drag-and-drop file for easier loading. |
|
|
|
|
||
|
If file is recognised, software automatically goes
to correct module and PROG button becomes active. |
|
|
|
|
||
|
Insert in programming hole needed transponder and press PROG.
|
|
|
|
|
||
|
At end of programming you get ready to start car or prepared for matching transponder.
|
|
|
|
|
||
|
If transponder have to be matched with car software also shows PIN code.
|
|
|